Welcome to Mr Bounce's Crazy Castles testing & repair service

Home | Products | Terms & Conditions | FAQs | Safety | Venues | Contact | Latest News

www.mrbouncescrazycastles.co.uk

Call us today on 07947369202 to book!

If you are unfortunate that your inflatable becomes damaged to to misuse or due to old age well look no further we are now able to offer a cheap and reliable repair service. So if its a simple bit of stitching that needs repaired or even a panel replaced we are the company you need. We would need to see the unit to give you a quote on the repair work.

All repairs are carried out to BSEN 14960:2019

PVC: The body of our units are produced in UK manufactured 610
gramme per square metre, fire-retardant, nylon based PVC which provides
the most flexible and hard wearing base for an inflatable unit. This PVC
is available in a large range of colours.

The PVC complies with the flammability requirements of BS5867:1980 Part 2 Type B as is usually required.

WEBBING: All bounce beds are re-enforced using 2" Polyester
webbing which is Flame retardant and UV stable so it does not rot or
fade in the sun.

STITCHING: The PVC is joined on a twin needle lockstitch
machine providing a hardwearing and robust seam. The thread is bonded
Nylon Twist produced from continuous filament Nylon. The manufacturer
confirms that this thread is manufactured to ENISO 2060 and 2062.

We are now able to offer PIPA testing for bouncy castles through our own in house RPII inspector, we have now set up a dedicated sister site to manage all the repairs and testing, for more information visit www.bigeventsafety.co.uk.

Mr Bounce's Crazy Castles Pat Testing

Mr Bounce's Crazy Castles can provide specialist PAT Testing (Portable Appliance Testing) Services. We provide a simple and cost effective solution, enabling all companies & organizations to comply with the Electricity at Work Regulations to get a quote please contact the team on ether 07582277161 or email us at info@mrbouncescrazycastles.co.uk.

Health & Safety Work Act 1974

Management of health & safety at work regulations 1999

Electricity at work regulations 1989

Provision and use of work equipment regulations 1989

Appliance Testing.

Each appliance is comprehensively tested to meet the exacting requirements for In-Service Inspection and Testing of Electrical Equipment. We use the latest computerized PAT testing equipment and are able to test all portable appliances in your company including - IT equipment, microwaves, house hold items, RCD plugs, blowers & extension leads. The inspection and testing will be carried out by a fully qualified electrical testing engineer.

Please see our pat testing risk assesment: Pat test risk assesment

Reports & Certification.

On completion of the testing you will be issued with a safety certificate and a detailed report that provides information on tests carried out on each individual item. All items that pass the inspection & testing will be labelled with a PASS safety sticker and any item that fails will have a FAIL sticker applied and also be labelled DO NOT USE and placed in a isolated area to reduce the risk of it been used after failure.